last updated 29.04.2024
Below is an overview of the Bosch software versions we have tested with our VOLspeed for the Bosch Smart System V1 (P/N 1318) and V2 (P/N 1350). Unless otherwise stated, all older software versions are also compatible.
If software version 11.9.3 is installed on your LED Remote, System Controller or Purion 200 and you have the VOLspeed for the Bosch Smart System V1 (P/N 1318), you can have the tuning updated by us. You can find information on this under the following link:
https://www.volspeed.de/Update-VOLspeed-Bosch-Smart-V1-V2/en
An overview for the old Bosch system can be found here:
https://blog.volspeed.de/bosch-softwarestaende-471/?lang=en
| Motor Type | Software Version | Compatible | Remark |
| Active Line (Plus) Gen3 from MY2023 Smart System | 11.13.0 | yes | |
| Performance Line Gen3 from MY2023 Smart System | 11.13.0 | yes | |
| Performance Line CX Gen4 from MY2022 Smart System | 11.13.0 | yes | |
| Cargo Line from MY2022 Smart System | 11.13.0 | yes |
| Display/ Control Unit | Software Version | Compatible | Remark |
| Purion 200 | up to 10.12.3 from 11.9.3 | yes only V2 (P/N 1350) | |
| Intuvia 100 | up to 1.1.55 | yes | |
| Kiox 300 | up to 11.9.3 | yes | |
| Kiox 500 | up to 11.10.0 | yes | |
| LED Remote | up to 10.12.3 from 11.9.3 | yes only V2 (P/N 1350) | |
| System Controller | up to 10.12.3 from 11.9.3 | yes only V2 (P/N 1350) | |
| Mini Remote | up to 1.1.20 | yes |
| Battery Type | Software Version | Compatible | Remark |
| Power Tube | up to 10.8.2 | yes |
| Component Type | Software Version | Compatible | Remark |
| ABS | – | no | |
| Connect Modul | up to 9.68.1 | yes |